Clear left and right windows that came with jeep in 2003, swapped for tinted and these have been stored since, no rear, just left and right, $50 for both
Posts by Jon
-
-
Includes synthetic fairlead
$35
-
Weird, just deleted a bunch of old messages, should be good now
-
Hey Mark,
I do have it, and yours if you want it. let me know when you want to pick it up, I'm in newark
-
Sold the TJ (2003 sport), so clearing out the garage - all available OBO in Newark for pickup, images available by request:
Sold
$225 - warn 67820 gas tank skid - never installed$5 - clear front fender side marker lamp assemblies for stock fenders (no bulbs)
$10 - 1 spare LCA from skyjacker 3" kit - used, cleaned up and sprayed for trail spare, bushings are still decent
$10 - most likely a Crown steering stabilizer came with an HD steering kit but I didn't need it
$20 - quadratec branded ivault secure radio enclosure - single din (still in box)
$15 - Rugged Ridge 135501.09 CB radio mount - this is a mounting point over the left air vent and I used it to mount everything but a radio
$20 - stainless quick mirror set up for drivers side - this has a permanently installed mount and the mirror screws into that
$20 - 2003 non rubi Stock rear drive shaft for d44 rear might need to balance but decent
$40 - A-Premium rear drive shaft for 2003 non rubi - put it in for a few months before sye was installed (this is supposed to be stock but was about an inch longer than my stock, no balance issues )
$20 - spicer 2-4-8091x end yoke (got it to replace the stock on rear d44 but didn't get it installed)$40 - Rampage 2201R Jeep rain cover - large enough to fit over with top up or down, have the storage bag, but lost the locking cable
https://www.amazon.com/gp/product/B000VWEBAM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
$200 - Bestop black denim rear fold-n-tumble seat (with headrests) - used this for a few years with kids in the back
https://www.amazon.com/gp/product/B001894LSO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
$25 - Mopar ski rack - mounts to a bracket under the stock rear wheel carrier
bunch of spare lug nuts, oil filter, hand screws for the soft top, random stainless lower door hinge, bump stops, wheel lock, shock mounts hardware available
-
I've got a warn gas tank skid that never got installed on a TJ I no longer own, not sure on the clearance but I believe its a higher than stock
https://www.warn.com/fuel-skid-plate-9706-jeep-wrangler-67820
I dropped $375 on it, would take 225
-
I've got stock springs, shocks and lcas from a 2003 if you're looking at going back to that, used for a year
-
Just to clarify, this is shocks, springs and lcas - just mentioned the tire package for reference on height of springs
-
Pics sent, also have lcas
-
Sure will send over some pics after work
-
On the jeep a year, in my basement since then... you know, just in case they were needed.
30 inch tire package so might be a step up from the completely stock size, either way only used a short time
I don't know what a fair price would be on a set - 80 obo? let me know if you need
pick up in newark
-
These have been sitting in my basement for years - 8 inch mtx thunder 5000 series 12 ohm subs
They were designed to go 3 in parallel to make a 4 ohm sub box, but I've only got two, so there they sit
$10 for the pair, pick up in Newark
-
Just did mine a few weekends ago, and the jeep OTC kit I got off amazon was better than what came with the harbor freight press.
During the removal the HF press actually bent so I went to advance autoparts and rented their deluxe press. That one had all the needed sizes and actually seemed to have better fitment for pressing the ball joints in than the OTC jeep specific kit, that was with synergy ball joints, guessing different brands might play better or worse with the diameters in the kit
-
Motorola surfboard extreme sb6141 docsis 3.0 cable modem
Works with time warner, comcast xfinity, cox, charter
Bought it last year rather than renting and just switched to fios so I can't use it
Goes for 99, sell for 60 -
Thanks all, it's been claimed
-
I'm not seeing anything noted in the write-ups I'm looking at, but do I need to drain the front differential and undo anything to allow the shafts to release or can I leave that alone and filled and just pull them out? I just pulled the cover and did the fluid a few weeks ago so no reason to open it back up unless I need to
-
Thanks, synergy came up in a few times when I was searching around, I'll check them out
-
Tried to get an alignment and was told I needed new ball joints first, anyone have recommendations on brands? I'm seeing Alloy USA on amazon for 150-set of 4, go for 194 on quadratec, anyone have experience with these? This is for an 03 tj
-
Gray bestop all weather trail cover, used maybe twice, fits directly over roll cage, snug fit with door flaps. Nice cover but I usually run the soft top for shade and it doesn't fit over that. Complete with stuff sack $50
-
Two on order, maybe the other two after the next sidewall goes