Albrights junkyard in north east used to be great when I was fixing camaros and trans ams. They charged next to nothing for parts when you pulled it and most of the time if they didn't know what it was they would give it to you. It was off of 272 heading towards Oxford make a left at the Nazarene campground and follow the road trough the s turn and it's on the right behind a few houses.
Posts by Vin
-
-
Got my cj7 back on the road from doing a frame swap. It's got a 84 drivetrain and hood, 78 fenders, 90 tub, 85 frame, and an 86 grille.
-
nwjeepn.com has an article on a diy for this. Click on the home page and scroll down you'll see the heading for it. It's under the recent articles section.
-
Bridge the solenoid with a large screwdriver.
-
I'll take it if you still have it I can swing by on Monday if that works
Vin -
I got my 84 cj through emissions, almost passed with a hollowed out cat converter. All with being nuttered the weber 32/36 made a huge difference. I had to adjust it to get through then readjust for best performance afterwards.
-
Yup I only need the stand.
-
I work in Philly and live in Odessa. I'm done work at 2 pm when is a good time for you?
Vin -
Do you still have the stand?
-
Lowes sells those same plugs in the hardware section in the drawers.
-
Just wondering if they covered just the portion of the frame facing out or was it more like the safe t cap like the auto rust repair kit. http://www.quadratec.com/products/12590_1000_07.htm. if you look at the picture closely looks like if could be a cap. I emailed m.o.r.e. and called them still waiting for an answer for over a month.
-
Hei and roll bar padding possibly the tires and valve cover. What rim size are the tires?
-
I would need the frame. Thanks anyway
-
I have full soft doors black in color good shape no tears. Also a fold in tumble seat grey in color. In fair to good condition, no brackets. Email for pics. Make an offer or trade. I am looking for yj soft uppers, and step bars for a cj7.
-
It's documented on the title.
-
How much for half doors? I could also use pass side seat belt make and female
-
Pep boys used to do it they still might. A local mechanic should be able to do it. However rotors and drums are made very cheaply now a days and rarely pass min thickness.
-
Radius the squared corner with a grinder or dremel. Harbor freight carries both. Rotary file the bumper receiver opening in the 4 corners. You only need to take like .015 off and it will slide in sometimes just knocking the powder coat and rust off it will slide in. Only takes like 5 mins to fix.
-
If anyone is looking for a surf fishing aluminum cart eastern marine has the best price on the sr at $215. Also the whole store is 10% off. Stock up on some fishing gear, sale is good to the 28th. West marine.com has the best deal for the jr at $171 shipped, but use coupon code affwest to get it. Also the jr. seems like it should fit in the atv rack from harbor freight which is on sale for 39.99 even cheaper if you got the25% off coupon in the mail like I did. Hope this helps!
-