Was mated to a Dana 300 not a 241 so length is probably not gonna work without adding tube for a 241 with an sye but would be cheaper to modify than a new driveshaft. Or use it as a trail spare. $50 and I’m pretty sure I have some new joints to go with it.
Posts by Tonka
-
-
I just ordered a pack of 20 new gorilla lug nuts for my Jeep and it turns out I need longer ones. $25. I can throw in extras that I had if you want matching lugs for your spare.
-
4” Procomp coil springs and short arms. Uppers in good shape but could use bushings. Lowers took a beating and need bushings. Let me know if your interested. Would take $50. 302-379-7796
-
Alright, I think I’m good for next Saturday. Are you guys in?
-
Sounds good Jay. Let me see if Ron will spot me. I’m not 100% in but there’s. Good chance.
-
Is anybody interested in doing the Individual RC Club Comp on Sept 21st? If so, let me know. Im still on the fence because of a lot of work travel surrounding it but I might do a day trip. Its on Facebook under the RC Club Comps page if your looking for details.
-
Randy, are you still coming up to judge?
-
Did you guys end up going? If so, can someone grab the club comp plaque off the wall in the office and I’ll pick it up from you in de this week? Preferably Someone who is returning to northern de. Let me know if your able to. Tell them Bernie is aware.
-
Nevermind. Looks like it’s all filled up. Still might be a cool wheeling spot to check out sometime this summer though?
-
Anybody been to the Famous Reading Outdoors Park in Pottsville? They are doing a street comp May 18th if anybody’s interested. I’m thinking about doing it. Three courses but you need to have a street legal rig to compete.
-
Where in Wilmington? Give me a shout and I’ll come grab them from you 3023797796.
-
JMess, That could work. I’m just looking for somthing to close the gap between a windjammer and some soft doors with a bikini top. Plus Staffords brand new stuff is too fancy for my rig. Do you get up to northern de ever?
-
I don’t remember ripping you off recently
-
Anybody got any tj door surrounds laying around you would part with?
-
1. Captain II
2. Stafford +1
3. Captain
4. Esoom
5. MrJoop +1
6. Whatevah
7. Astspe + 1
8. Slimer's
9. KitKat (Slimer's wife)
10. Brian & Kelly Frank (maybe kiddos but hoping to make alternate arrangements)
11. Shorebird
12. Imarammr
13. Kimber
14. Solomi +1.5
15. JKGray10
16. AEZ
17. JimPKeith +1 (Miranda aka wife)
18. Kuntryboy816 +1 ....might just sign her up for membership before the party
19. YJDave + Maggie
20. deadfeat - can help out, can get there early.
21. TheDarkSide + nutrijeeper
22. Spedly
23. Katie
24. Sandtostand
25. KnoxRents + 3 kids
26. Lisel
27. Antnyr
28. JIlrn
29. Clendaniel
30. Jc1121
31. Dkirkley + Bee
32. KiddoRN
33. RedOliver + 1
34. Meeper
35. Tonka -
Anybody interested in judging at the rc comp next weekend?
And if anybody else is interested in driving you can sign up on the Facebook page or just let me know.
-
Forgot to sign up but I’m here through Sunday. Just got setup.
-
I have a tekonisha Brake controller for Gm vehicles that came out of my avalanche. Barely used, worked great. Will need the mounting clip and the wiring harness. You can get both on amazon for less than $20. Would like to get $40. 302-379-7796.
-
Brand new in the box. $40. 302-379-7796
-
Range technologies obd2 programmer. I had this in my 07 avalanche to keep it in v8 mode. Some of the Chevy motors are know to produce issues due to the cylinder deactivation and some people just don’t like the lag it creates when switching back from 4 cylinder. Anyhow, this thing plugs in and keeps the vehicle in v8 mode without changing the stock tune. Works very well. I’d like to get $120 for it. Works on a wide range of Chevy vehicles. Look it up on amazon for more info. 302-379-7796.