Jeep Fluid Capacities

  • Engine:


    2.5L 4 cyl - 4 quarts
    2.4L 4 cyl - 5 quarts
    4.0L 6 cyl - 6 quarts
    3.8L 6 cyl - 6 quarts


    Transmission:


    30RH 3 speed auto - See post #2 below
    32RH 3 speed auto - Approximately 4 quarts ATF+3 when drained via dropping the pan / Approximately 8 quarts dry fill (see post #2 below for fill procedure per the FSM)
    42RLE 4 speed auto - Approximately 4 quarts ATF+4 when drained via dropping the pan / Approximately 8.8 quarts dry fill


    AX-5 5 speed manual - 3.3 quarts 75W-90 GL3, 75W-90 GL4, or 10W30 (NOT GL5 or GL5 compatible as incorrectly stated in some of the manuals)
    AX-15 5 speed manual - 3.32 quarts 75W-90 GL3, 75W-90 GL4, or 10W30 (NOT GL5 or GL5 compatible as incorrectly stated in some of the manuals)
    NV3550 5 speed manual - 2.1 quarts Mopar fluid part # 04874464AA or Synchromax (meets Mopar MS-9224 specs)
    NV1500 5 speed manual - 2.4 quarts Mopar part # 04874464AA or Synchromax (meets Mopar MS-9224 specs)
    NSG370 6 speed manual - 1.58 quarts Mopar part # 04874464AA or Synchromax (meets Mopar MS-9224 specs)



    Transfer Case:


    231 - 1.1 quarts ATF+3 or ATF +4
    241 - 2.1 quarts ATF+4



    Axles:


    Dana 30 - 1.25 quarts 80W-90
    Dana 35 - 1.75 quarts 80W-90 or 75W-140 *
    Dana 44 - 2 quarts 80W-90 or 75W-140 *
    Rubicon Dana 44 (FRONT) - 1.375 quarts 75W-140 synthetic
    Rubicon Dana 44 (REAR) - 2 quarts 75W-140 synthetic **


    *4 oz of friction modifier is required with Trac-Lok limited slip differential.
    **Friction modifier is NOT required with Tru-Lok locker/limited slip differential (factory Rubicon locker).



    Cooling System:

    2.5L - 9 quarts
    2.4L - 10.1 quarts
    4.0L - 10.5 quarts
    3.8L - 13 quarts

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!