Recommendation.

  • 2008 JK - Rusted drivers side floor pan... hole


    Looking for a recommendation for a shop that will install a new floor pan


    Any ideas are appreciated... Thanks

  • How big is the hole? Do you need to replace the whole floor pan or can you get by with a patch panel?

    Member since 2000

    Jeeps Owned'79 CJ5:

    Specs-

    - 258 I6

    - '93 Cherokee fuel injection and HO head,

    - bored 30 over

    - with 4x4 cam

    T18 tranny with granny low / Dana 18 t-case

    Dana 44 front and back from late '70s Wagoneer, both locked and loaded with 4.88 gears

    SOA on modified YJ springs with shackle reversa

    Fiberglass tub with 6 point cage mounted to the frame


    2015 Grand Cherokee Limited
    Spec-

    Quadratec Floor mats

  • Hole with the
    rusted edges is roughly 10x10. But the rest of the Jeep is in great shape - Should I replace the full panel to reduce continued corrosion?


    Thanks

  • Inspect the soundness of the entire floor pan. If the rest looks good, I'd probably cut the area out back to good metal and patch it with a piece of sheet metal. Then coat everything with a good rust proofer.

    Member since 2000

    Jeeps Owned'79 CJ5:

    Specs-

    - 258 I6

    - '93 Cherokee fuel injection and HO head,

    - bored 30 over

    - with 4x4 cam

    T18 tranny with granny low / Dana 18 t-case

    Dana 44 front and back from late '70s Wagoneer, both locked and loaded with 4.88 gears

    SOA on modified YJ springs with shackle reversa

    Fiberglass tub with 6 point cage mounted to the frame


    2015 Grand Cherokee Limited
    Spec-

    Quadratec Floor mats

  • There are a few guys on here that can do it. Aastape, Shadyluke, and I believe another one who I can't think of at the moment.


    If you want to go to a regular body shop, I recommend Accurate Collision. Friend of mine is part owner. Small shop that does great work. Most of their work is insurance related but they are both hot rodders and their way around custom work.

    Member since 2000

    Jeeps Owned'79 CJ5:

    Specs-

    - 258 I6

    - '93 Cherokee fuel injection and HO head,

    - bored 30 over

    - with 4x4 cam

    T18 tranny with granny low / Dana 18 t-case

    Dana 44 front and back from late '70s Wagoneer, both locked and loaded with 4.88 gears

    SOA on modified YJ springs with shackle reversa

    Fiberglass tub with 6 point cage mounted to the frame


    2015 Grand Cherokee Limited
    Spec-

    Quadratec Floor mats

    Edited once, last by Slimer ().

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!