I am working on replacing bushings and parts on the front suspension of my 97' TJ. I ordered a stock track bar ( not knowing the lift nor size installed by previous owner) and just noticed the one on the jeep is an adjustable. I lost the hardware to attach the TB to the frame side mount. Looking online I find a service kit that says it is the hardware. question is stock the frame side mount is a tie rod end, the adjustable all use a different kind of joint?
Track bar
-
-
Not sure what u r asking. There r about 20 different adjustable tj tb bars. Some use stock ends but the hd versions use bigger stuff. Can u post pics of what u have and links to what u want to buy?
-
I am trying to figure out if i can replace the joint on my current adjustable trackbar and if so what kit would it be. Looking at it it could be a JKS it also could be a Currie because its just black. Cannot add picutres, will try again
.
-
if its a heim then any brand would work. U need to measure the threads and if they r right or left thread and the hole diameter that the bolt goes through. Companies like roughstuff and barns have good offroad joints
-
Thanks for the info as always Astape.
-Matt
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!