Sent you a PM
Posts by jbates
-
-
Do you have the bracket that bolts to the transmission and supports the transfer case linkages?
The Bracket on the left side of this picture with the green grommet -
I will take it. Sent a pm
-
I will take it. I need that bracket
sent you a PM -
Jerrod, this is what you need for the beach. It will be done in a four door for the show.
http://www.foxnews.com/leisure…-ordered/?intcmp=features
Billy that would be nice!
I do think I should order a Rubicon with 3.73 gears since I do want to upgrade the tires to probably 33s and I dont really want to swap out the axles. altough the sport does come with a Dana 44 rear. -
I was thinking about the Rubicon just wasnt sure if that was cost effective or not? Also I was thinking I should adjust the gearing as I thought that was way too low. This would be my "Family" Jeep so not too much offroading especially since I do have the other Jeep for that ;D
-
So what do you guys and girls think about the options on the unlimited sport version? Do you think I would have an issue with the 3.21 gearing? and it is a 5spd automatic
-
We are planning on being there also
-
Not sure if you have checked your catalytic converter yet? I had an intermittent problem very similar to this were it would lose rpms and then I would have to pull over, restart jeep, and it would then run ok. Not try to throw more things for you to check but it would be easy enough to run with out the cat connected.
-
Sent you a pm last week. Give me a call if you still want the bracket
-
Sorry man I forgot.
I do have the bracket but not sure about the bolts and that spacer which you do need. -
I am pretty sure I have that bracket. I will check when I get home and let you know
-
Sent you an email
-
I did the 5.9L swap and use my stock gauges. I sent the wiring harnesses to Evan at Backwoods Offroad
He knows his stuff and can answer any question.
http://www.backwoodsoffroad.com/Backwoods Offroad
1144 Wilderville Ln.
Grants Pass, Oregon 97527
(541) 955-0363
Has anyone compleated the 5.3 conversion? How in the weeds is the rewiring? Can you still use the factory guages? I think with the 4.0 and the 4.3 you can use all the factory guages knowing the tach needs a mod to convert it to a chevy. -
Talk to Larry Church from Bluementhal Manufacturing
I bought my nv3550 from them and they have a 12 month warranty also. I had a small issue and they swapped it out without question.
Light Duty Manual Transmissions, Transfer Cases, Clutches & Differentials
301 S. Western Ave.
Oklahoma City, OK 73109
(405) 232-9557 or (800) 262-9557 -
Just make me an offer man I wont be offended. I already have other flares waiting to go on and these are actually off of the Jeep now. So you could have them in ten minutes if you wanted.
-
I have some TJ Flares and I am right down the road from you.
http://www.delawareja.com/forum/index.php?topic=32250.0 -
Thats part of the problem I dont have a garage right now to fab up anything hopefully I will this summer.
-
What would you guys recommend I put in? 98TJ with a 2000 5.9L I would like to install an aluminum horizontal flow rad with an electric fan. Let me know what you guys think. Thanks
Looking at this one http://www.quadratec.com/products/17800_1101.htm but the outlet and the inlet ports are on the wrong sides. Top port needs to be drivers side and bottom port on pass side.
Or http://www.quadratec.com/products/51210_310_07.htm -
There are no words that can dimish the hurt I can only imagine your feeling. I am extremley saddened to see this post. I was hoping that we would see you and Patti at the meeting in Bear this past Sunday. She truly was a wonderful person and like the other posts she made sure to welcome my kids and I whenever we showed up to the Spring Fling or any other gathering. She had just asked me if we were going to join you guys this year in GWNF. That brightened my day to know that she was thinking about us when she had so many other things on her mind to deal with.
Heaven has another angel looking down upon us keeping us safe. We miss you Patti