I'm with Shadyluke...Mine did the exact same thing when the TPS went out.
Posts by BigCam54
-
-
OMG... I'm kinda at a loss for words. Percy was an awesome guy. I've been gone awhile since my jeep's been broken and didn't know he was in bad shape. I have quite a few pictures of him from our RC runs we made together if you need them.
-
NV3350 has been found and bought still looking for springs
Now, looking for a set of 3" lift springs for a TJ. Have a set of RE 4.5"s I'm willing to trade (still on Jeep)
-
X2 on the 5.3. Not a good aftermarket but a fantastic never ending one.
-
I wont be down tommorow but I will be on Tuesday. I may end up going monday too but thats not set in stone yet. I wanna try to get in on the trout run lately.
-
Jeremy, Its yours.
-
Just got done moving and found a few things I need out of the way of my other projects.
YJ
2.5 Fan shroud - $10Brand new cowl seal (still in bag) - $15
TJ
Front set of Rusty's 2" Springs (could use paint but never sagged) - $30Stock Tierod (Good trail Spare)-[size=1em]$20[/size] -
I think the OP may benefit from splitting this into two threads - TJ and JK. Different people can bring different knowledge to the table - just saying...
Very true, Im from the TJ/YJ crowd. Ill wrench on whatever as long as someones around has a clue. -
I live in Dover too, if you need any help just PM me and depending when your able to do it, I may have garage space availible. I have all the tools needed or close by as well.
-
Keith,
So sorry to hear about your loss. I only met Patti once at GWNF a few years ago but it still leaves me in shock. You and Patti are in my thoughts and prayers. -
Opps...Sorry, I didnt even see it there.
-
I know this is from another forum but its still good info and write up on the 05-06 TJ gas overflow problems. Just passing it along.
http://www.jeepforum.com/forum…gas-overflow-fix-1335243/
Fyi, the part listing from GM Parts Direct.
http://www.gmpartsdirect.com/r…art=1&partnumber=15131046 -
I was looking at a set of these eventually w/ the 3.5" flare. I would get some used fenders to do this to, so I could keep my stock fenders and flares in case DMV doesn't like them much.
http://modernclassicenterprises.com/ -
Anytime. Im back on my tour at work and wont be able to make it down that way till Wednesday during the day. The TJ isnt my DD so no rush.
-
As the title states, I need a another stock pitman arm.
Lemme know If you have anything available, Thanks. -
I have one in Dover your welcome to.
-
I usually wave at all wranglers and lifted XJs. However, I have got the "Wave" from a few lifted Sammi's and Toyota's which I always return.
I'll stick my arm out the window if it's open (but don't wave it) and if the window is closed, a full hand if they're too far away to see the 2 finger "wave".
This ^ -
-
I used to have a 2" coil with a 1 3/4" spacer...It worked fine for the fronts but I suffered alot of spring sag and eventual failure in the rear from the spring over compressing past the spacer during flex. With proper bumpstops, I dont see why it shouldnt be ok. Over compression of the spring would be my only concern.
-
These are the ones I have in mine. They look great and aren't too bright. Now don't be like me and put one in the high beam indicator. Now with my high beams on, it looks like I'm part of the blue man group.
http://www.v-leds.com/Interior…E-WEDGE-p6298444-1-2.html
Slight Hijack: Anyone know the part number for the factory high beam light, it was a smaller bulb than that #161 that I removed. I would love to use my highs again instead of looking into a fision reation every time.