Delmarva Offroad is now selling the full line of Bend-Tech software. For those who do not know, Bend-Tech offers software for tube bending, sheet & plate metal work, as well as full assembly software. This software truely is a MUST for all fabricators, the cost of the software will be easily saved by the scrap you would have with it. DOR has been using the Bend-Tech software in our shop with great results so we figured we would pass on some great offers for you!
Bend-Tech EZ - $67.99
This simple software has a library with many different bends. Just choose the one you would like to make , push one button and it will tell you how long your base material needs to be to make the perfect bend, and it tells you where to mark your tube for the start point!
Bend-Tech EZ 3D - $147.99
This is a simple software package that will make it possible to do multiple bends including off plane leggs. You can design your part, rotate it 360 degrees and look at it from any angle, so you are certain that it is designed correctly from the start!
Push one button and it will even tell you how long of a piece of tubing to cut, where to mark the tube, and any calculation necessary to create your parts. Simple to use and a GREAT addition for the fabricator that wants PERFECTION!
Bend-Tech Pro - $273.99
This program handles everything from one simple bend to building your whole project as shown to the right. When complete, it will detail each bar so you can create each individual piece and show you the angle and degree to notch it at. Rotate 360 degrees to view from any angle
Bend-Tech SM - $284.99
Bend-Tech SM is designed for the hobbyist, schools, proto-type shop, maintenance facility or performance shops. It is their answer to the sheet metal and plate design world. You will no longer need to spend the big dollar or otherwise obtain the high-end solid modeling systems to design sheet metal parts. This is the ONLY sheet metal and plate design software available on the market that is aimed primarily at the hobbyist, schools, proto-type shop, maintenance facility or performance shops. Use Bend-Tech SM as a module within Bend-Tech PRO or Bend-Tech SE and you will find yourself designing tubing, plate and sheet metal together.
Bend-Tech SE - $508.99
This software is as good as it gets. The ease of use EZ, The 3D capability Of EZ-3D, and the assembly design of PRO. This is a must have if your job or business depends on bending tube. Ideal for high production manufacturing and offers greater design flexibility.SE provides those extra tools that you will need when you are concerned about setup and production times.
Give us a call for more information or to place your order!