After my #1 piston dropped it skirt into the pan, I'm just finishing up getting it back together. I got everything up top buttoned up, except for two connectors I can't find a match for.
Both connectors are the same style, color and pins. The rear connector is down by the top of the bellhousing towards the driver's side adjacent to the transfer case vent. I thought this was the rear oxygen sensor (my TJ is a 2002 and has the split exhaust manifolds each with its own oxygen sensor and cat) as I remember breaking it off it's anchor when I took it apart. Anyway, the oxygen sensors plug into the harness that runs the injectors by the front and rear of the fuel rail.
The front one comes off the harness that goes to the AC compressor. Its the same connector, just up front.
Anyone have any ideas? Thanks
