It came out of a 2000. But should work with any AX-15 platform. The internal vs external slave difference is the housing that bolts on over the input shaft and can be easily changed. The OD of the shaft, if different, can be easily fixed by just changing pilot bushings/bearing on the motor.
Posts by jrostocki
-
-
Ax 15
$350
jamie
302 250 5541
jrostocki@msn.com -
WTB Dana 30 w 4.10
jamie
302 250 5541
jrostocki@msn.com -
is the frame solid?
-
I have a SYE & CV DS and looking at it there is a fairly significant angle left to right. Why wouldn't the left to right angle have the same negative affects as the up/down angle?
-
Sine the 8.8 is roughly 1.5 narrower than a stock yj rear and the pinion is offset, why not just install the rear 1.5" offset to straighten out the drive line angle and just run a 1.5" wheel spacer on one side of the rear? I have previously run 1.5" spacers on a high hp car with no issues. Is there any reason this wont work?
-
using a an original cj Laredo dash
-
On this one I am using a later model YJ tank and putting the walbro pump in the tank. I took a stock yj sending unit assembly and just attached the pump to it. I am also converting this to a cj dash so I had to add a cj fuel sending unit to the to the yj assembly. The yj does not have an in tank regulator so I am just running the standard supply and return to the tank. The last one I did I used an inline pump and the c5 corvette fuel filter that has the return built into the filter and just ran one supply line to the motor while blocking off the return at the motor.
I also have for sale a complete kit to hook up a LS motor to an Ax-15 if you are interested.
-
thats a nice maggy you got on there. 5.3? im doing a swap in my yj right now. whose tunig yours, i work at an lsx shop called horsepoweraddicts in st george's let me know we can do the tuneYup its a 5.3 w/ a ls6 cam. I decked the heads a little to give me a little more CR. Its just a 112 and I know these things will heat soak with big boost. My plan is to eventually get to 8-10 lbs and add meth. My goal is to get to 500 rwhp if possible.
-
-
Intended victim
-
Added a blower and mega raptor trans
-
Need the long one - How much ?
-
-
Do you ever make it up north?
-
-
TTT still looking
-
Might be interested in the shocks too - how much for everything?
Jamie
250-5541 -
I will go $50 for everything minus the shocks
-
Thanks!