Posts by Vin

I have at the very least the gear box and bracket, I have to check for the pump.

I have a 1984 cj engine and a 88 yj engine harness both from a 4.2.
Make an offer. I'll also have a 4.2 available for parts next week. #5 cylinder has 58 psi and #6 has 127psi. The rest have 155.

I may be interested in front seats and roll bar padding.

dump the bbd carb, you can play with the mixture screws all day and it makes no difference. I put a weber 32/36 on my cj and could almost get it to pass with a hollowed out cat converter. ( previous owner told me all new exhaust). Disconnect vacuum advance and lean out the carb till it stumbles but can run on its own. I've always detuned it in the parking lot and re-tuned it in the lot once I passed. This has worked for me twice so far and my emissions would be in single digits, the tech at the dmv told me my cj runs cleaner then a newer car.
Don't put cleaners in your fuel or engine before you go it will break up the gunk and burn off out the exhaust, making your numbers higher then they should be. Also don't go on a rainy or humid day, carbs have a hard time compensating humidity especially when they are not computer controlled.

Fuel pump

GONE

All yours come get them!

I have a few tj parts I got in a parts lot awhile ago.
6" flares never used 1 is missing and a few soft top parts, looks like a belt rail and side pieces that attach to the roll bar kind of look like a "S".
Take 1 take all.
I'm in odessa national.

I got a spare I don't need. Center cap for a cj. It was part of a lot I traded parts for. Once adding proving the folklore cj guys hoard parts. It's still in the box. My cj is driver side offset. If your interested let me know.

It's on their website for 5k but it is rusty.

How much work is involved in doing the swap on a 84 cj with a 4.2 and t176 4 speed?

Google. Diy hard top hoist jeep. You'll see a $12 one with eye hooks and camlock straps. I have it in my garage it works great. Might be easier than lugging it with rope.

I'm in for a group buy.

Wheel bearing, bent axle

I've got a never mounted set of flares for a tj missing pass front. You can get it online for around $100.
$85 for everything. Pm email or phone if you want pics. It's also posted on Craigslist. It was all part of a parts lot I got, and I have a cj. So tj parts are of no use to me.

Vin

No problem, if you need a few tips doing the swap let me know I finished mine back in August.

One just posted on Craigslist in Philadelphia. Title is. Jeep yj 4.0 frame.

Sold

Sale pending for Sunday

White cj wagons in decent shape with 26575 15 plenty of tread but a bit on the dry side.
$20.00 message with your email or phone if you want pics.

Townsend in Odessa national