The clutch works fine I don't Offroad (gulp) ... I didn't replace the flywheel the first time due to it lookin fine. I replace everything the second time just because I was in there.
For the cost of a new flywheel I'd just replace it , the clutch kit comes with a pilot bearing
Sent from my SM-N910V using Tapatalk
That clutch you linked is the one I have, I'd suggest that you get an all metal throw out bearing and not even the ones that came with it.
The one pictured is the one I got
Sent from my SM-N910V using Tapatalk
Thanks for the cover, I'm putting it to good use keeping the cat foot prints off 
Sent from my SM-N910V using Tapatalk
My 99 ax5 has 277k with no problems... I replaced the clutch when I put a new engine in at 215k it still looked new in comparison to the new clutch, I had to replace the clutch again at 270 due to the cheap plastic throw out bearing exploding...
I did the job myself in my garage with basic hand tools in 4hrs...
Sent from my SM-N910V using Tapatalk
If surfrider doesn't get it, I'll take it. I could meet you somewhere Sunday
Sent from my SM-N910V using Tapatalk
I've got a 666 tag too, not on my Jeep though
Sent from my SM-N910V using Tapatalk
I have asked people running LED headlights about this and none have had problems with ice buildup.
Mine last winter...
And the winter before...
No, rolled on with a foam roller then wet sanded and polished
Sent from my SM-N910V using Tapatalk
I only used about 4oz of paint thinned 50/50 with mineral spirits, it goes a long way
Sent from my SM-N910V using Tapatalk
@whatevah I did not do a thread about it...
Basically what I did was wet sand all the texture off and put like 5 coats on, let it cure a few weeks then wet sanded and polished it
Sent from my SM-N910V using Tapatalk
Google $50 paint job...
I did my top this way like 7 years ago, my top on my 99 is SMC (sheet moulded compound) I've had zero problems 
This is what it looks like now
Sent from my SM-N910V using Tapatalk
The pics are turned 90° on the web, on Tapatalk they are straight up...
Sent from my SM-N910V using Tapatalk
I have trucklites and the inspector in Dover didn't like them... he made me pull up to the door and checked the aim and such. He passed me but didn't like the amount of light they throw to the sides
Sent from my SM-N910V using Tapatalk
No they mount different
I have a tan one, I'll see if I can find a pic
I did the savvy cable shifter last year probably one of the best upgrades
Replace the flywheel, I didn't when I did my first clutch and had problems with jerky starts. Since replacing the flywheel it's been smooth as silk
Oe clutch was smooth so when I replaced the engine I reused the flywheel.
Wasn't under the tree, but... I bought oil and filter on Christmas eve, I changed it after everything settled down. After drain, filter change and refill the Jeep wouldn't start, I had to clean the terminals for the 3rd time in a couple months... (the battery had been seeping acid for a couple weeks) so I bought an agm battery from Advance Auto 
I did my uppers with duplicolor vinyl and fabric flat black and they turned out great 
