Posts by prm99v6

Whats left now is:

New Front Springs
Lengthen Drive-shaft
Boomerang Shackles
Summit Fuel Cell

Then when money permits

PSC Comp Corners
PSC Tube Fenders

These are some pics at full droop. The shackles do not hit, however I am going to go to the rockcrusher boomerang ones anyway and running the bend towards the front.

Did you also buy a 2ft patch cable?

That would be special, at least to try them out. We have some pics of it flexed out and the shackles are close but they don't come close to touching. Worse comes to worse, we can cut the shackle mounts and lower them on the crossmember but I don't forsee that happening...

what vehicle?

I have a yj one for sale

i will try to find out how much he wants tomorrow. and turtle was correct with his response.

it was NOT the curry one that Ian did not like, he liked the curry and it is sitting in my garage for sale as we speek.

ian uses this

Joe

Sears hardware has steel and aluminum. I just got a 12x14 ? piece of aluminum yesterday for 9.99. I need to fill in around my t-case shifter on the yj.

call them. Like I said the last time I spoke with them, was a couple of months ago, and they were taking pics. It might be in production now, or maybe they have an idea when.

http://www.claytonoffroad.com/

I would run claytons

I don't know if it is released yet, last time i spoke with them they were taking pics for the instruction manual.

I will convert to a claytons long are kit with coil springs...
basically the same as their tj long are kit.

check them out

you need a business license, tax id number and if I am not mistaken, they require you to actually have a business ad in the phone book.

you can not pick tires up at their site.

This is for wholesale customers only. I have been dealing with them for the last 6 years.

Quote from "Way of the Jeep"

I didnt know there was multiple. It was a darker colored, either black or dark blue. It was huges, 35s, maybe even 37s.

Yes there are multiple ones, and no they don't all belong to the same person

Whats your address

Quote from "04TJguy"

Everything was installed last night by the guys at Audio Jam. It sounds great!! The sub box fits super tight. I pretty much have to slam my tailgate to close it. As soon as I can figure out how, I'll post some pics.

Uhh......Audio Jam don't you mean Audio Works......

Thats a very BIG mix up and NEEDS to be corrected

pm me with the year and make of your truck, and I can tell you how to disable it.

I cut the nipples and the edge off the inside of the flares. Held them up where I wanted them and traced the bottom edge with a marker. That was my cut line. Then After I cut I held them up again to mark the holes for drilling. I used nuts and bolts I got from sears. Wasn't really a big deal.

Quote from "jc1121"

I'm out now. I've got some funky creaking coming from my front end. I need to figure out what it is before I take it wheeling again.

you mean ian needs to figure out what it is

i run a 37" tire on it. It says it can support 200lbs and I am using well under that