Okay.. Ive been down this path before w the old TJ. Regeared to 4.56 with aftermarket shafts and sye. Fought vibes till the day i sold it due to the increased driveshaft RPM... (partially due to bad TC output bearing) but i digress..
My question is to the fellow JK owners here, Im thinking about regearing to 4.88 or slightly taller in the future and still run factory drive shafts. Should I expect a Similar vibration issue as with the TJ? This is my daily driver that frequently see's 75mph highway roadtrips. Currently it rides beautiful on the highway without a single vibe but is a dog in start stop traffic. If vibe issues are common during a JK regear I will just put up with the current set up..
School me!!!
Posts by JKSteve
-
-
Does anyone have the tapered reamer needed to do a DL flip on the JK 30. If so any chance I could borrow it in the near future?
Thanks,
Steve -
count me in! 3 Favorite things in 1 place!
-
-
Hey man,
put me down for the drag link and control arms! Would also like to look at the springs... Can pick up tonight or whenever!
Ill PM you also
Steve -
Havent recieved a text or call yet
-
Cool, Thanks for the heads up
-
Bought this and Didnt end up using it.. new in box
http://www.jeepswag.com/jeep_j…relcoation_kit/index.html
My loss is your gain
$75 obo
call or text Steve
843 412 5262 -
Like the add says..
Never used
$25 obo
Call or text Steve
843 412 5262 -
10 LB powertank (Black)
250 PSI High flow reg ( I Think )
Viair clip on fill kit
Standard air chuck fill kit + Airline Extension
Tank was Hydro tested and recertified 3 months ago..
Asking $200
Call or text Steve
843 412 5262 -
Like the add says,
Annv ed 29 LX CB w/LCD, Bulit by Local CB shop... Not your average 29
$175 ( Payed over $250 for this radio 6 months ago)
Call or text steve for pics or info
843 412 5262 -
Like the add says, Tuffy overhead CB console w/ locking door.
$150 obo
text or call for pics or info
Steve 843 412 5262 -
Throwing a Truss on the D30 is on the short list, Any chance a Forum member with a welder and a garage would wanna give me a hand?? IT would be much appreciated!
-
Decided to just rattle can it, Im thinking some self etching primer and satin black should do the trick... If it ever shows up!
-
-
Thanks for all the replies! Im not dead set on powder coating, I was just under the impression that the adhesion with aluminium would be better with the PC than a standard rattle can paint option.. The anodizing is a great idea, I want to have it black to match the jeep and I'm afraid that the Anodizing will fade with sunlight ( correct me if im wrong here..) If I was to prep and paint it myself (which i would prefer) what would be the best way to go about it? Etching primer + Standard rattle can black???? What type of cleaner? and do you need to scuff it at all?
-
Genright Alum tire carrier is in the mail!! Can someone recomend a good powder coater local to the newark and surounding area? Thanks in advance!
-
Tenatively Sold...
-
Will be ordering the new ones at the end of the month....Theres Still time!!!
-
Bumpity Bump! FOR SALE!!