Posts by FZMax
-
-
More pictures
-
Pictures attached
-
These doors are black, but they appear to have been born silver. They are straight. They are missing the inner panels, mirrors and the plugs have been cut, but the glass is tinted. I got a great deal on them and since half doors are so expensive I was going to make half doors out of them. But I found a set of real half doors (came to my senses) so these have to go. I'm guessing they are worth around $400, but I'm open to trade for Jeep parts I can use. I'm interested in TJ and JK stuff. I don't have any immediate needs so let me know what you got. I'm out of town now, but I'll post pictures and more details on Monday. Located in Fair Hill near Main St in Newark.
-
-
Thanks, I'll check them out.
-
Bringing this thread back from the dead. I've been searching for gpx files so I can try load the data points into the 430N in my Jeep. While I know Rausch pretty well, I'd love to find Anthracite, Rock Run, etc. Anyone have one?
-
Welcome.
There are many ways to fit larger tires. How much that will cost you depends on how you're going to use your Jeep. If you want to go off road, the stock size tires will take you through almost all the black and blue trails at Rausch Creek on a properly set up Jeep.
-
-
-
It's a low pinion from a 02 TJ. Thanks for the confirmation.
-
Thank you
-
If I remove the yoke from a Dana 30 to replace the seal, can i simply reinstall it or do I need to replace a crush sleeve?
-
If things don't work out with YJDave I have a stack of steel YJ rims with old, dry-rotted tires that hold air. I'm in Elkton and they are free for the taking.
-
-
Thanks, I'll message you then.
-
I'm just looking for the stock front lowers, any leads appreciated.
-
Wheels and tires have been sold. Thanks, DeJA!
-
Hey Jerry, if you want to come down to Elkton, I have a 100 foot 5/16 cable you can have. It came with my M8000. I changed to synthetic. PM or email, fzmax at comcast.
-
I used Accurate machine https://www.accurate-machine.com/ to do the machine work on mine last year. I got their name from recommendations on this tread:
Looking for a machine shop recommendation
They did excellent work, on time and within budget. He is very familiar with 4.0's.