I've made camping reservations at Hickory Run State Park in White Hall, PA. Thurs. 8-11 until Sunday 8-14. 54 bucks, can't beat that. Site number 16.
Here's the website, http://www.dcnr.state.pa.us/stateparks/parks/hickoryrun.aspx
Joe
I've made camping reservations at Hickory Run State Park in White Hall, PA. Thurs. 8-11 until Sunday 8-14. 54 bucks, can't beat that. Site number 16.
Here's the website, http://www.dcnr.state.pa.us/stateparks/parks/hickoryrun.aspx
Joe
I'm out as well. Won't be able to get the TJ running by Sat. Looks like Alan has become guide for the "Hardcore" by default!!
Joe
I managed to breakdown coming home from the meeting on Sunday. I lost an idler pully and my Serp. belt was to loose to run my Power Steering, Water Pump, Alt. and Fan. Because of that I overheated and had to pull off of Rt. 1 at the Smyrna exit.
Luckly, I got ahold of Chris (Quadna71) and he let Matt (Claymont Hillbily) know about my situation. Matt came by and we assesed the situation, which we found out I was pretty much screwed. The Idler pully sheared the bolt off in the block. Couldn't do anything without that pully. So Matt then strapped me off of Rt. 1 and into the Food Lion parking lot off of 13.
I called Chris back up and he then go ahold of Tony (DaMutt) and made arrangments to bring his trailer to pick it up the next day (Monday.) Matt then gave me a lift home to Newark.
Fast forward to today, my Jeep was still there when I returned. I tried to use an EZ-out on the bolt but didn't get anywhere. About 11:30 Tony and Alan (1TonTJ) showed up and decided to trailer me to Tony's were we would work on my Jeep some more.
We then proceded to get the bolt to move slightly, but not much more than that. Tony tried to weld a bolt on to remove it, but that wouldn't hold either. He then tried to build up a head on the bolt, but ended up tack welding the bolt to the block! After a while, we ended up grinding the weld down, but were still unsuccessful removing the stud.
We just didn't have enough room between the Fan, shroud and radiatior to get any leverage on the bolt.
So, instead of tearing into removing the Radiatior at Tony's, we put it back on the trailer and towed it to Chris' house. It will sit there until I get a chance to get back down there and pull the front end apart. Hopefully it will be this weekend or next.
I want to give everyone that helped out so far a BIG thank you, Matt, Chris, Tony and Alan. It's really great to see this many people help out a fellow Jeeper in need. I owe you guys bigtime.
Joe :heart:
Looks good Mike. A little out of place on your Jeep, but I'm sure it will look good on mine!
Too bad it's stuck down at Chris' house for a while! :upset:
I'll post the long story on that one!
Joe
I'll lead, as long as nobody protests! I'll post a tentative trail list in a day or so.
Joe
Looks like I'm gonna be able to make this run. I'll be running Blacks and meeting at Wawa.
Tony, we started M trail on the last ride, but ended up having to take a shortcut because of time. I'm game for getting through the whole trial this time!
I'll have a right seat available if anyone is interested.
Joe
Sounds alot like my Full Detroit! Makes it fun to drive! Does the
LockRite unload as bad as a Detroit? Sometimes it sounds like you left some parts back on the road! It just makes your passengers uneasy, not me!
Joe
Looks good Mike! When you gonna build me a shorty?? :question:
Joe
Great pics! I'm partial to this flex shot!
Joe
They're Maxxima 9-LED White courtesy lights. I had to pop off the clear covering, cut down down to 2" and retro fit to my existing 2" lights.
Joe
I picked up a set of white LED's to replace my "bulb" lights that were currently in my Jeep. Had to really "modify" them to fit my existing
2" grommets but I think the first one turned out quite well.
Can you tell which one???
Joe
I've got a Jig saw (I think), sawzall and Angle Grinder. I should be available late Sat. Morning if you come to my house. I'm in Newark, around Bear.
Let me know.
Joe
Looks great! I'd like to see some pics of the Tailgate as well. I Always wanted to do that mod.
Joe
I'm planning on making the trip. I'll meet at WaWa as well.
Joe
This is the one I have, and I think several other club members as well.
http://www.harborfreight.com/c…item.taf?itemnumber=38335
If you need it, I can bring it to the meeting this Sunday.
Joe
I got my spedo gear at the dealer. Just give them the following part number: 52067632.
Here's a link to a spedo chart.....http://raingler.com/tech/speedoChart.asp
HTH
Joe
Edit: Darn it, Linyee beat me to the punch! :upset:
We are you located at? A couple of us in the Newark area have York OBA on our Jeeps. I think I've got a bunch of leftover fittings your welcome to if you need them.
Joe
I know Zach from http://www.atozfabrication.com can build you a custom cage. Check out his site for examples of his work.
He did my Flat Fenders, and will listen and do anything you would like.
I know Wayne at Up and Over did Aaron's full cage as well. There's two local options.
Joe