If I would have known, I could have let you borrow that as well!!
If your still in the area, let me know if you need it.
Joe
If I would have known, I could have let you borrow that as well!!
If your still in the area, let me know if you need it.
Joe
Looks good!!
Joe
Mike,
I picked up a Waggy box along time ago, actually Aaron got the steering box and pitman arm. He needed the arm and I wanted the box. He pulled the arm off, but I have never gone over to pick it up. I think it's at Don's house.
Your welcome to check it out and see if it fits your needs. It is an upgrade in bore size.
Let me know and I'll try to track it down.
Joe
Question is why didn't you let anyone else in on the deal???
Can I ask how much? The others are around 120 I believe.
Joe
Poison Spyders has ones that looks similar...
Zach can also make anything custom, here's one example...
As you also saw mine, he can do anything you ask.
Joe
It's just one pair, either fronts or rears. I plan on stopping by the Toy Run on Sat. around 10am, but I can't hang around too long. Let me know if you'll be there that early, if not I can leave them at the table.
Joe
I have a pair of Mike Green weld on skids that have never made it on my Jeep. 20 bucks and they're yours.
Joe
Quote from "Slimer"Do you really need the side marker lights?
Because they came that way from the factory, I figure I should still try to have them. Don't want any trouble from inspectors or Police
Joe
Quote from "BBD"That Looks Great!
How do you plan to address the need for a front side marker light?
I plan on wiring up a LED marker light on the side of the Hood. Should work fine.
Joe
Here are some shots of the completed project..
Zach did a amazing job, I highly recommend him for any custom fab work!
Joe
I like this one of you better Tom...
Joe
Sorry, but I won't be able to make this trip......again
I'll be in Memphis,TN all weekend for work.....sucks :upset:
Guess I won't make it wheeling till next year.
Joe
The stock inner fender is retained, these are bolted up as close as you
can get at the pinch weld along the hood line. Same concept as the Poison Spyder ones.......just square!
Joe
Yea, That's my Jeep. Can't wait until they're done!!
Joe
Here's a work in progress shot of my new square tube Flat Fenders that Zach is making me...
Should be done in time for a quick showing at the Toy Run I hope!
Joe
That's awsome! Hope you work out all the kinks installing that, because maybe someday if I'm good enough, Santa will be me a Clayton Long arm kit too!!
Joe
Chicken Run is rated a Blue 2......Check out Paragon's rating of trails here....http://www.paragonap.com/p_trail_descriptions.htm
With 1 being easier, 2 harder, 3 hardest of the levels
2wd access roads - Yellow
Stock trails - Green - levels 1,2,3
Moderate trails - Blue - levels 1,2,3
Heavily modified trails - Black - levels 1,2,3
Extremely modified trails - Red – Guide Required
Purple - ATV ONLY Trails
Joe
Artie,
Talk to Brian(MOPARTECH) he did my gears and lockers for under what your looking for and did it over a few days. I just dropped off my Jeep and he took care of the rest. Being a Dodge Tech has it's advantages (lifts and all!!)
I've never had an issue and he even helped me change the gear oil after the break-in period. I highly recommend.
Joe
I would love to be there as well, but I'll be heading out on my Anniversary weekend getaway. :heart:
Sorry.
But good luck anyway!
Joe