Posts by pitjeep
-
-
-
its 25.00 includes show & shine & course for 2 days
-
napa filters are made by wix & flow better than most
-
your not suspose to feather a clutch thats what causes clutch fade , heat is not good on clutches ask me how i know.
-
ever find the prob?
-
-
switch the control mod sometime if you leave the key on awhile they will fry. if its not the mod keep it in toolbox should carry a spare anyway & they are cheap with lifetime warranty fron az
-
i run the cf 11 cant tell a diffrence in pedal
-
i like bds for the warranty. all leafs will sag sooner or later, some sooner than later.one of my rears is bent from a rock, bds said send the rear set back for free replacement no questions asked.
-
undo what you did see if that works. or start at battery & check everything to dist.i,m thinkig maybe control mod is bad.
-
is this a members only affair ?
-
buy a beater to wheel
-
how does the fusion paint hold up?
-
yes it will,i wouldnt do that.
-
if its a dana 300 t-case you can get a clocking ring & clock it. if your going to get a lift anyway throw a 4in on it & try that. you can look around & find a used 4in lift cheap. i like my bds it was a little stiff at first but is breaking in & seems not to sag as some others do with the v8 & winch weight plus they have a great warranty.i,ve had to reroute my ehaust twice & getting ready to do it all new soon. there a guy down here that does it however you want it & reasonable priced.
-
my wife loves it. atleast she knows where i,m at.
-
you can clock the t-case or try to flip the drive shaft around & see if that does anything . do you have any lift? most with a 4in lift can barley clear the pan some also clock the t-case.
-
search on cjoffroad theres a guy in ohio that rebuilds t-18s he gets like a grand for them with warranty , he may have parts also.
-
open to non members? might like to make this again with the wife. have an unbreakable tierod this time