We should be pushing out our line of diff covers here very shortly. All covers are made for 3/8" thick A50 plate steel. These are designed to be the strongest covers on the market and truely last a lifetime. Many others use a cast steel which may lower their production cost but does not provide the same benefits to YOU as our covers do. If you want to add hydro assist or even full hydro steering you can weld the mounts directly on the diff cover which will provide you with great angles for the ram. The same is true for a suspension suck down winch on your axles. The diff cover provide a great location for tabs for the winch line. If you try that on a cast cover, you risk cracking due to the difficulty in welding to cast. Many other companys that offer steel covers only use 1/4" steel which you will risk bending
Will be starting with our basic D30, D35, D44, D60, Ford 8.8, and GM 14 bolt covers. Intro pricing should start at about $100 for the smaller covers. Please shoot us an e-mail if you would like to pre-order at the lower cost.