If you have a 4.0 Yj 94 or 95
I need to take a look at the transmission wireing
.
.
.
.
.
.
.
.
Please
-
-
I am 99% done with a 4.0 swap into my 95 Yj
the donor motor and wire harness is also out of a 95 YjBoth motors were mounted to auto trannys
I have the new motor wired up but have found I am missing the transmission
wires.
On the 2.5 the trany wires were part of the engine harness and the FMS shows it should also be that way on the 4.0.
On the motor harness there is a un conected conector that is in the area
where the transmission wires should come up under the hood.
problem is this conector location is not listed in the FMS.I looked up the conector by shape and the manual said it is the daylight headlight conector..but it is in the wrong location this head light conector
should be on the left fender.
This one is on the main wire harness on the passenger side firewallI need some help here has anyone ran into this conector before and if so is this where the transmission feed piugs into?
The plug has 10 pins 4 large and 6 small. like this
0ooo0
0ooo0 -
You can look at mine, it's a 94 4.0L manual tranny. I'll be away all day tomorrow and it'll be parked at Andrews house. Let me know if you need it and when. I'll be around on sunday. Good luck.
Nikki
-
Thanks Nikki
I may take you up on that yours should be the same as mine bit I have the auto tranny.I'm working this weekend so I'll give you a shout later
-
what are you going to do with the 2.5 auto?
Chris
-
I guess I'll
Scrap the block / give away motor parts I'll not need
I'm keeping the Alt.
and maybe a few sensorsSell the Trarnny
Sell the transfer case
I need to make up a little of the expence from the $1000
i put out for the motor.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!