Posts by poppatello

  • Looking for Cj Parts

    Looking for a set of 4:56 gears, front carrier, and front auto locker for a stock 84. Didn’t know if anyone had one laying around from a previous project or parts Jeep. I’m not interested in any axle swaps. Thanks.



    Sent from my iPhone using Tapatalk

  • WTB CJ Steering Box...

    I'm looking to source a power steering set up for my 84 Cj. I need the box, pump, hoses, and brackets. My manual steering box is bad and looking to convert it over. However, if anyone has a good manual box laying around let me know what you want for it. I need to change it out quick. Figure I would check here before I go to Cragislist or look for remanufactured or new. Thanks is advance..

  • Cj Driver Side Floor Install...

    Quote from astape

    depending on how bad it is i can help with the welding. Im not much of a body work guy but recently i have fixed up a few tj floors.


    Aaron




    Aaron, it doesn’t need to be perfect. Just strong and water tight lol. I can bring her by for u to check out and let me know.



    Sent from my iPhone using Tapatalk

  • Cj Driver Side Floor Install...

    Wondering if anyone could cut out and weld in a new driverside floor for my 84 Cj 7? If anyone is interested please feel free to text me. I’m in New Castle.


    302-981-2690


    Thanks



    Sent from my iPhone using Tapatalk

  • 84 Cj. Sale or Trade...

    Yup, that's the one. Is your grandfather Davis? He sold it to my Uncle Ron Dietrick. They hunt together. The jeep did have writing on the hood and rockers. But I painted the rockers black to hide the letter and fade. They were owned by some landscaping company in Wilmington.


    My jeep does not have power brakes or power steering. I have tried over the years to add power steering but just couldn't get it together. I have put a lot of time and money into this baby.


    Between Mr. Davis and my uncle they got it running. Patched up the original air filter lid and changed all the fluids. From what I understand Mr. Davis took the one he got running first to his cabin and offered the other one to my uncle. I found out about it a few months later and sold my AMC Eagle wagon to get the money for the jeep. It had no top and doors for it but it had a frame. I think I still have the original frame in my shed.


    Damn, talking about all of this brings back memories and making me want to hold on to this again.


    What have you done to your Cj? Any pictures???

  • 84 Cj. Sale or Trade...

    OTW? Not sure what that is. I got this rack from Gene Reynolds in Delaware City. From what I understand if the rack looks like mine it is one of his. I had the rack mount costume made to attach to three points on the front bumper so it's the strongest it can ever be and stronger then anything else out there. It attaches using the 2" receiver in the center and the D rings on each side of the bumper...

  • 84 Cj. Sale or Trade...

    Well, I am finally ready to let her go. She's been sitting on my car
    trailer for two years now. Body much worst then it was. I have things
    for it that will go with it for the right price or I will start selling
    it off in pieces soon. I am chasing a new hobby. I'm back into air cool
    VW's or Corvairs now so I want to move the Cj along.



    84 Cj with the AMC 4 cylinder. Has the T-4 trans and Dana 300
    transfer case with a twin stick. Front has a Aussie auto locker. Rear
    is stock but is trussed. I have a spool for it and ARB locker only. Jeep
    has a 4" BDS lift with 35" tires. Tires have less then 1k miles on
    them. Has a CB in it, blazer heater motor upgrade. Runs but needs a
    battery. I have a two barrel Weber on it. Has a Warn 8274. Never had it
    hooked up. Don't have controls for it. I was planning on rebuilding it.



    Has
    costume front and rear bumpers. I have lots of extras. Low miles AMC
    304 motor. Motor is not complete. Needs volley pan, oil pan gasket,
    water pump, oil pump, and fly wheel. On an engine stand and goes with
    it. I also have a Ford T18a but needs jeep output shaft. I have the Cj
    hard doors for it and soft half doors (will not take any uppers). I
    have a 20 gallon poly tank for it (used). I have a summer top for it and
    original dash pad. Has front sway disconnect.



    I also have it
    posted on Facebook market place. Lots of pictures there. Feel free to
    text me for more info or pictures. Jeep should run with a jump. Hasn't
    started in two years.



    jeep only has 45k miles on her but has been outside before I got it 12 years ago with no top and doors.





    $3200
    for everything and I will bring the jeep to you within reason 1 1/2
    hour one way. You will need to pick up the motor and trans. OR trade
    for manual VW or Corvair, or deuce.



    Text 302-981-2690



    PLEASE, NO TIRE KICKERS. DON'T WASTE MY TIME. SERIOUS BUYERS ONLY Clear title in hand. Not tagged.




    https://www.facebook.com/marketplace/it ... 3332673405



    I will sell the following items separate by the end of the coming week. Aug 18, 2017.



    AMC 304~~~~ $325



    Ford T18a~~~$200



    Warn 8274~~$250



    20 gal Tank~$50



    Spool~~~~~~$100



    ARB Locker~$550



    Surf Rack~~$550 (new are $1000)