Kid Crusher to Family Style

Issue swapping any ideas.

I have a 90 and found a family cage from a 95. Only issue were the drivers side spreader was bent...no problem, I can use the one from the 90. I pulled the spreaders off the 95 bar (the torx was in from the back side of the center hoop into the end of the spreader). When I went to look at my 90, the spreader attaches to the other part from the top with a torx with the "lock pin" in the center. Also it will not "fit" onto/attach to the 95 bar. Hopefully that is enough info to make sense.

I thought I could use the spreaders from the 90 with the "back" part of the 95...doen't look that way. What do I do??? Thanks.

It looks as if the kid crusher style has a piece that goes into the spreaders and the torx screws in from the top. Do the spreaders serve any purpose? Do they add structural integrety? If not could go CJ style witha family cage...just a thought. Any body got a set of spreaders fro a family style bar?

Thanks Chuck...I'll wait to hear from you.

Cool. Let me know what you want for them. I plan on being at the meeting on Sunday but if you are not...I can pick them up from you at work....I will be in the brach area lots over the next couple weeks.