good shape, no cracks or anything, missing one mounting nut, both bolts intact.
$50 for the pair
good shape, no cracks or anything, missing one mounting nut, both bolts intact.
$50 for the pair
bestop brand, dark tan color, clear window, never installed. retail is $99.99, asking $70.00 obo
Also zj owners be patient, they don't have the parts anyway
ok, I'll ask. Why do you have a sword hanging in your garage?
sorry to get off topic, but at least you get a bump out of it
I ran them last year. work great but they do whistle. shake a little but still very usable, and if it bothers you, I'm sure you can tighten them up some more
sorry, meant the mirrors Keith just installed, not the mirror movers.
I ran them last year. work great but they do whistle. shake a little but still very usable, and if it bothers you, I'm sure you can tighten them up some more
if you want to blend in a little better, you can get a surf rod and reel at dicks sporting goods for around $50. I find the less you stand out, the more you can get away with
shouldn't have any issues, I'vd taken the TJ through with 2 pc doors before
I'll be away this weekend but if I see folks heading out on another weekend I may try to come out. How long do the rockfish run off of the surf?
depends, this year I never saw a really sustained rush, just a few bunches here and there, but its usually late fall, once the water hits about 55*
4.88's with 35's, and have no idea, because I know it's not good. last time I checked it was around 10-11mpg's
you may have been better off saying Limestone rd and Papermill rd
tj:air compressor installed and air lines run
swap out control arms
out board rear shocks
por-15 the frame and gas tank skid
wj:
swap control arms and bushings
install shocks
wk:
replace rear d/s wheel
detail inside and out
leave the cap off again tonight, wait for the water to freeze. Once the water freezes, pour the oil through a strainer or sifter to get the particles out. Should be good to go after that
I'm at about 2600 rpm at 65 with 4.88's and 35s IIRC
I go out year round. Winter is my favorite. It's going to be almost 70 degrees on Sunday. If it's not raining, I'll be out.
in shorts no doubt
There is a video of him spotting a rig he built the cage for in a comp. rig got hung up and the only way to make it out of the course in the allotted time was to roll it, so Zach pushed it over on it's lid and down the hill.
I'd say he trusts his own work well enough
will it be in CHSP this year?
was that the one at Piazza Mazda on 202?
your set up should be fine with the 3.73. Good luck with the build