Well I have started my one ton YJ build so I have a lot of parts that need to find new homes.
4" Rubicon Express Lift - There is less than 16k miles on this lift. One spring has slight tweak to it but very useable. All of the spring bushings are in excellent shape. I have new dana 35 u-bolts for the rear. The front brake line extensions and rear axle degree shims are new. The trac bar relocation bracket had broken like most. I welded it back together and added another tab to it for some additional strength. The front shocks seemed to have leaked and should probably be replaced. The lower bushings look a bit worn on the rear shocks, I was running them upside down so once you put the metal sleeves in them I think they would still be ok. I no longer have the extended rear brake line, t-case drop, or sway bar disconnects (never ran a swaybar on my YJ). $250 obo - Pending
XJ HP dana 30 - 3.07 gears, Non-disconnect axle. Has ABS. No rotors or calipers. $100
Rear Seat - Bestop told and tumble rear YJ seat. Excellent condition (almost never used). I can include the seat brackets if need be. $175
4.0L head - From a 96. It is the 0630 casting. I was told that it probably needs a valve job. $50
Crown YJ extended brakes lines for 4.5-6 inches of lift. They are smoke colored but the outer plastic is starting to split but otherwise in good shape. Paid $85 new from Qtec, sell for $50.
I'm sure I will come up with more as I keep tearing it apart. I'll try to get some pics posted in the next couple days or message me and I can txt them quickly. All parts are available for pick up in Lincoln University, PA 19352.