http://www.quadratec.com/products/16160_03.htm
Used off my TJ...comes with a free sway bar because it's easier to remove the whole thing than remove the disconnects from the bar. Comes with one of the two frame mounting pins but, honestly, I wouldn't use them. Its easier imho to just zip tie them up. They are about 3 years old...they aren't the prettiest looking things at this point but they get the job done.
^SOLD
http://www.quadratec.com/products/16091_0175.htm
http://www.quadratec.com/products/16091_0177.htm
Old Man Emu 2.5" HD shocks....4 total...about 3.5 years old. Fronts are in decent shape...rears the shock cover is kinda banged up but it's all cosmetic. Expected scratches and dirt, etc of course. The rears need new upper bushings and either bar pins or bar pin eliminators. I may have an extra set of bushings, if they are the right size I will throw them in else the bushings should be around $5 each somewhere.
$175 $100
Shocks are now for sale too. They, of course, will sag a little over time but for all intents and purposes they are good as new.
http://www.quadratec.com/products/16090_4XX_A_PG.htm
http://www.quadratec.com/products/16090_4XX_PG.htm
$150
Take the shocks and springs for $225. Retail new all this runs about $700 if you get the rear track bar relo bracket.