So today I was looking under my jeep and saw that my right front bump stop had snapped off and is now jiggling around in my coil. My question is can it be fixed and if so who knows how because I can't weld to save my life haha
Something else broke!!
-
-
TJ right? Isn't there a bolt in there that holds it in place? did the bolt snap?
-
If it's a tj, then yes there should be a bolt holding everything together. Did the cup come loose? Or is it the bumper itself that broke off? I know mine had dry rotted and crumbled.
-
The whole assembly broke off metal And all which is why I'm afraid I will need a welder to fix it
-
No. You might need a bolt extractor though. If the metal cup came off either that broke or the bolt broke. You'll have to take a good look at it and see what's left. Or post up a picture of what broke off.
-
If the bolt broke you could just weld the cup on. Easy if you pull the coil out.
-
I cant seem to get photo bucket to work on my computer you would think for a 19 year old I would but nope ;D so I don't know how else to explain what broke exactly. lets just say the whole thing that the rubber part is attached to which is metal snapped off inside the coil
-
-
[img width=700 height=900]http://i.imgur.com/2JlMwFS.jpg?1[/img] ok heres the picture
-
yea, that will need to be welded. quick easy job for someone on here that has a welder.
-
Wow. Yeah, that's not what I was expecting.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!