I'm going a different route and won't be using this. No shafts or steering but carrier and gears are in it. Knuckle to knuckle. Passenger upper control mount is bent so it's perfect to truss or throw on hd mounts before it goes under your rig. That's the one that rips off anyhow. Looking for $150
Hp Dana 30
-
-
I have buddy looking for one what gear ratio?
-
I believe it has a carrier but no geara
-
It's whole as far as the diff goes. 3.55 gears and I don't know if the diff has ever been open.
-
Bump. $100.
-
Bump $75 and I'll throw in shafts that are good but need ujoints. Also has hubs but not sure if they are any good. Brought it up front for my yard sale and really don't feel like moving it again. I may negotiate if you buy it this weekend.
-
It's whole as far as the diff goes. 3.55 gears and I don't know if the diff has ever been open.
what did it come out of hp 30's wewe in yj and xj'sif the doner was a 2.5 manual it shpuld be looking at 4.10 gears the auto trannies ran mostly 3.73 gearing.
some early non fuelinjected modles had 3.05's :upset: -
It came out of somebody's yard the stamp on the diff tag says 3:55
-
vacuum disconnect or 1 piece?
XJ or YJ brackets?
-
No disconnect. Brackets are for an xj I think but they are bent and need replaced. I was going to do a truss or just hd replacements. Stock brackets suck anyhow. (If you drive like me)
-
deff 3.55 then
-
For $75, I'll take it (especially if you are throwing in the shafts.) As long as the knuckles are the same between a LP and a HP.
Just pm me to let me know where I can pick it up.
-
i couldn't figure out the pm on the new site. Just give me a call or text. I'll be around this weekend. 302-379-7796
-
yes chris the knuckles havent changed
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!