I'm getting ready to pull the trigger on a new sye adapter and will more than likely buy a new drive shaft and use the current one as a spare. The old one will technically work but should be slightly longer.
Because I'm keeping the flanges instead of yokes switching between the sizes/drive shafts in my jeep should be no issue.
There is $110 difference between the two. I see some people say 1350 all the way. Others say 1310 because they would prefer the drive shaft to break before the axle.
I currently have an 8.8 rear with 4.56 gears and a locker with 35" tires.
If you were to buy a new drive shaft would you get the 1350 size U joint or stick with the 1310?
Sent from my iPad using Tapatalk