Ring Gear Info

    Quote from "J-Man"

    My ring gear has 7 3096 Dana D 40790 P8L690 43 14 218 is that 355's or 307's or what?


    Divide the number of teeth on the ring gear by the number of teeth on the pinion.

    It's a 3.07. I beleive the '43' is the number of teeth on the ring gear and the '14' is the number of teeth on the pinion.


    What gears are you loooking for? I have 3.73 and 3.54 for a CJ Dana 30 and 3.73 for a CJ Dana 44.

    Member since 2000

    Jeeps Owned'79 CJ5:

    Specs-

    - 258 I6

    - '93 Cherokee fuel injection and HO head,

    - bored 30 over

    - with 4x4 cam

    T18 tranny with granny low / Dana 18 t-case

    Dana 44 front and back from late '70s Wagoneer, both locked and loaded with 4.88 gears

    SOA on modified YJ springs with shackle reversa

    Fiberglass tub with 6 point cage mounted to the frame


    2015 Grand Cherokee Limited
    Spec-

    Quadratec Floor mats

    I have 4.54's for a CJ D30 and AMC20
    Not that it has any bearing.


    Like everyone else said, divide the teeth on the ring gear by the teeth on the pinion gear.

    I got a 8and1/4 off of Wolverine and the gears are not the same as what I had.So I went back and got the dana 30 from him and took the gears out to put in mine.They look small,thats why I wanted to know.Thanks it sounds like 307's :down:

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login