Hey guys, I was looking over my ride after the trail run. From being dirty I noticed the front upper sway bar bushings have a bit of movement. Is this much normal?
Sway Bar Play
-
-
It was the same on my 2003 TJ and my wife's 2001 TJ. I've seen some people on forums that installed a clamp on the inside edge of both of the brackets to keep it from drifting and allowing the upper mounting point of the swaybar link to make contact. Here's an example of what I mean: http://www.quadratec.com/products/15160_100.htm#install
-
Thanks for the info. If ur saying it's somewhat normal, and it's up to the comfort of the operator... I will monitor it and look into the clamps for future install
-
Mine moves side to side a bit, no prob
-
its suppose to slide a little. Its because its attached as the axle is articulating. Get discos for wheeling and it will relieve the bind when offroading.
-
its suppose to slide a little. Its because its attached as the axle is articulating. Get discos for wheeling and it will relieve the bind when offroading.
I actually bought jks last week, just haven't had the time to install them.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!