My new to me Tow Rig
What have you done to your Jeep today?
-
-
Other then the fact that its a hemi (must be a PA thing ) I love a Flame red sport. Congrats
-Brad
-
Got the truck back from paint
-
Got the truck back from paint
I'm assuming you only painted the rear fenders and thats why you didn't fix the dent. -
Painted the whole bed. Didn't fix the dent because it only visible from the angle, otherwise it is covered the but bumper and fender. If it gets annoying seeing it then I will pull out and fix the dent when I fix some rust starting to show on the doors. Then the bottom half will be painted black.
-
dirty? yes
but out of the way? finally! -
Got a few things done recently.....
-
dirty? yes
but out of the way? finally!
Its about time -
Wow Ed thats looking sweet. Next time you roll, aim for the rear
but seriously Ed that things going to be awesome -
Got a few things done recently.....Looking pretty crowded in there.
Will the hood close? ;D
-
-
Wow Ed
ImpressiveToday I was inspired to create a new Cake/Based Cookie
I will call itPineApple Upside Down Elff
Jeep is misfiring. Im gonna clean the engine bay from all the oil, replace all 6 sparkplugs, put fuel injector cleaner in it and see if I can get it firing on all 6. I did the next course on 5 cylinders and it really screwed me up. Jeep would stall vs crawl. Final course Ian and me hit our zen and did really well. Jeep felt like it was on 5.5 maybe 6 cylinders but is back to 5 now that I got it home. It will get fixed, im not worried
Pics to come. Jen got it all [Thanks Jen, those pics are freaking AWESOME!!!]
Total driver error. I hesitated after Ian told me to gun it.Anywho. Ian and myself had a blast and we did not finish last. I
FYI - Get an AtoZ cage. I have almost no body damage and I was on the roof. The other part that really saved me was the hoop bumper that Billy and me both have.
-
Looking pretty crowded in there.
Will the hood close? ;D
Yup it all fits, but the hoops come through the hood.....but i planned it that way -
Fresh coat of paint.
-
Freshened up my surf rack.
Rustoleum on the steel.
Krylon Fusion on the plastic.
Just need my 2011 sticker and I'll be good to go.
-
Looking good. I need to get a good surf rod holder for the front of mine. Who sells those things?
-
Looking good. I need to get a good surf rod holder for the front of mine. Who sells those things?I bought the rod holder off ebay and built the frame.
You can buy pre-made ones various places.
-
Yesterday's first course
[youtube]External Content www.youtube.comContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.
No worries, it'll buff out. -
Pulled the headliner out, reattached the fabric to it so it would quit flapping in the wind, applied sound dampening to most of the interior, and put it all back together. I even lined the inside of the front doors and the hatch with the mat - hopefully I'll do the inside of the back doors another day when my ambition is recharged.
Before - factory speakers sounded sort of tinny and you could hear the wind on the roof very clearly. Other cars on the road were pretty easy to hear too.
After - factory speakers now rock! Sounds like I put in a tight 6" or 8" sub and no more rattle on the loud/deep notes. I took it for a ride and you can barely hear any noise from wind or other cars. Once I finish the rear doors and swap out the muffler for a quieter one then I'll be satisfied.Here's the roof before and after applying the sound-proofing mat
[img width=1200 height=800]http://www.delawareja.com/gall…nloadItem&g2_itemId=32284[/img]
[img width=1200 height=800]http://www.delawareja.com/gall…nloadItem&g2_itemId=32287[/img]Here's a quarter panel before and after
[img width=1200 height=800]http://www.delawareja.com/gall…nloadItem&g2_itemId=32290[/img]
[img width=1200 height=800]http://www.delawareja.com/gall…nloadItem&g2_itemId=32293[/img]Headliner with the fabric pulled off - half of the dry-rotted foam is scraped off
[img width=1200 height=800]http://www.delawareja.com/gall…nloadItem&g2_itemId=32296[/img]All scraped and prepped to glue the fabric back down
[img width=1200 height=800]http://www.delawareja.com/gall…nloadItem&g2_itemId=32299[/img]Headliner all finished
[img width=1200 height=800]http://www.delawareja.com/gall…nloadItem&g2_itemId=32302[/img]Interior all reassembled
[img width=1200 height=800]http://www.delawareja.com/gall…nloadItem&g2_itemId=32305[/img] -
Very cool...
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!