Need Comanche (and/or) Xj Cherokee parts

    I should have the wiper motor cover and vented windows. I know I have 3 or 4 sets of the vent windows, I'll find the best looking pair and get you a pic tomorrow afternoon/evening. Anything else you didn't mention while I'm at it?

    There are 2 (mostly stripped) at shorty's in king of prussia but there was some good stuff left as of a week ago.


    I have a set of vent windows for you, but one is missing the handle. Didn't take a pic for you yet since I want to clean the dust off them first.

    As it stands right now I am planning on starting my build
    right after xmas. These are the parts I would like to have
    in hand before then....


    ***Next priority is a 1991-1992 Comanche parts truck. Any
    condition, title/no title it just needs to be complete with working
    fuel sender.


    New/Used 86-92 Comanche Specific Parts:


    [2x] Factory Rollbar Brackets
    [color=rgb(0, 0, 255)]- (I have a set of wheel mounts, but still need frame brackets.) [/color]
    [color=rgb(0, 0, 255)][/color]
    This is what the mounts look like installed on the truck!
    [color=rgb(0, 0, 255)][/color]


    Rear Bumper
    [color=rgb(0, 0, 255)]- (Just looking for a solid OEM bumper - dinged up is fine.)[/color]
    [color=rgb(0, 0, 255)] [/color]


    [2x] D44 Rear Axles
    (I will pay a premium for an Mj specific AMC20)


    [2x] Cargo Light Switch Plates
    Headliner panel
    Carpet in Black
    Carpet in Grey


    Factory Rear Mud Flaps - Thanks mzariboy
    LWB Factory Rollbar / "Sportbar" - Thanks Mr. Bible
    Driver Side Rear Bumper Bracket[color=rgb(255, 0, 0)] -Thanks ScottJeep[/color]
    Rear 3-pane slider [color=rgb(255, 0, 0)]- Thanks Kkilmer87[/color]
    [2x] Cargo Lights [color=rgb(255, 0, 0)]- Thanks Kkilmer87[/color]
    3-pane slider window clip [color=rgb(255, 0, 0)]- Thanks Kkilmer87[/color]


    New/Used Xj/Mj Parts:
    Complete as possible 86-93 BLACK interior


    Warn Trans4mer Grille (or similar)


    Factory Front/TC skid plates.


    Front Factory Mudflaps
    Door Window Vents
    Tilt wheel column with InterWiper and Cruise buttons. (in grey or black)

    94-99 Ax15 with external slave - [color=rgb(255, 0, 0)]Thanks AndyZJ [/color]
    AX15 Bellhousing and crossmember - [color=rgb(255, 0, 0)]Thanks AndyZJ [/color]
    NP231 Transfer Case - [color=rgb(255, 0, 0)]Thanks AndyZJ[/color]
    Window handle "rings"[color=rgb(255, 0, 0)] - Thanks Kkilmer87[/color]
    Grey/Black Sunvisors[color=rgb(255, 0, 0)] - Thanks Kkilmer87[/color]

    I drive WAY too fast to be worried about cholesterol...

    Edited once, last by Bonkers ().

    Updated thanks to AndyZJ.

    Jeepman, Shadyluke - Do me a favor; next time you happen
    by those JYs could you please shot a pic or two for me? I don't
    get out of Sussex much these days.

    Thanks again guys!

    Hey guys - I got a good tax check coming back so
    I am updating my parts search. I need several Xj
    parts so if you guys in the Xj clubs see something for
    sale on another board please shoot them in my drection.

    Andy - I plan on coming up for that axle (if you still
    have it) and shift linkage once the check arrives...
    maybe a couple of weeks.

    Bumping this back to the top. Been on something of a
    part roundup here lately since it feels like I am getting
    closer to the final push. Ive heard rumors of two Mjs
    sitting in backyards (one in Harrington area, on in
    Townsend area.) If you see a commanche sitting in
    a backyard, or out for sale, please let me know. I have
    no issue with knocking on a strangers door!

    As always I appreciate any/all help Ive been getting on
    this little obsession!

    Uh, can't remember the guys name on JF but he's got MJ parts...check the JF classifieds. Of course, he's located out of state so they'd have to be shipped.

    Edit: DirtyJeepGuy is his forum username

    Your life is made up of 2 dates and a dash... make the most of the dash!

    Edited once, last by Kuntryboy816 ().

    Gonna Bump this for old times sake...


    Pretty much have everything now except the Warn
    Trans4mer Grill Guard - spec'ed for Xj (#60766) but
    itll fit the Mj. If anyone happens across one for sale,
    please let me know!


    Thanks!

    Might want to post a pic of what one looks like since some people now-a-days aren't sure what an MJ even is.

    Member since 2000

    Jeeps Owned'79 CJ5:

    Specs-

    - 258 I6

    - '93 Cherokee fuel injection and HO head,

    - bored 30 over

    - with 4x4 cam

    T18 tranny with granny low / Dana 18 t-case

    Dana 44 front and back from late '70s Wagoneer, both locked and loaded with 4.88 gears

    SOA on modified YJ springs with shackle reversa

    Fiberglass tub with 6 point cage mounted to the frame


    2015 Grand Cherokee Limited
    Spec-

    Quadratec Floor mats

    Quote from clendaniel

    He has a pic further up in the thread:


    Yeah, but for someone who is not familiar with the MJ, it just looks like an XJ in the picture.

    ~ JD
    * WARNING - The above post may contain trace elements of biting sarcasm. Those with known sensitivities should avoid staring directly at it.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login