just got a smittybilt rear bumper with tire holder and hitch. does anyone else have one? like / dislike? also need to know torque specs? stock specs?
bumper install questions
-
-
Proper torque specs per bolt type. I would Also use Nylon loc nuts.. If metric, there are also charts for that
-
Torque specs for a bumper? How about balls ass tight? Grade 5 or Grade 8 bolts.
-
Torque specs for a bumper? How about balls ass tight? Grade 5 or Grade 8 bolts.This^ .... If you are working on a TJ or even an XJ (You didn't say) you will be lucky to get an open end wrench on half of the bolts let alone a torque wrench.
-
You can tell the torque by the depth of the cuts in your hands
-
yeah, good and tight... unless you're using a big cheater bar, you won't get them too tight.
-
Its on and I used German tight "good and tight", torqued it down. It looks good and works well. I cut the third break light down and mounted it, pictures coming soon.
-
Besides German torque, there is also Obscene torque which is f**king tight, and Navy torque where you tighten till the threads strip, and then back it off one flat.
-
-
Looks good!
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!